Advances in Cement Research

ISSN 0951-7197 | E-ISSN 1751-7605
Volume 34 Issue 11, November, 2022, pp. 502-517
Open access content Subscribed content Free content Trial content

REFERENCES
Ajavan PM (1999) Nanotubes from carbon. Chemical Reviews 99(7): 17871799. Google Scholar
Alarcon-Ruiz L, Platret G, Massieu E and Ehrlacher A (2005) The use of thermal analysis in assessing the effect of temperature on a cement paste. Cement and Concrete Research 35(3): 609613. CrossrefGoogle Scholar
Al-Rub R, Ashour AI and Tyson BM (2012) On the aspect ratio effect of multi-walled carbon nanotube reinforcements on the mechanical properties of cementitious nanocomposites. Construction and Building Materials 35: 647655. CrossrefGoogle Scholar
Atif M, Afzaal I, Naseer H, Abrar M and Bongiovanni R (2020) Review – surface modification of carbon nanotubes: a tool to control electrochemical performance. ECS Journal of Solid State Science and Technology 9(4): 041009 (14pp). CrossrefGoogle Scholar
Babita SS and Gupta S (2018) Synergic effect of SDBS and GA to prepare stable dispersion of CNT in water for industrial heat transfer applications. Materials Research Express 5(5): 055511. CrossrefGoogle Scholar
Bilalis P, Katsigiannopoulos D, Avgeropoulos A and Sakellariou G (2013) Non-covalent functionalization of carbon nanotubes with polymers. RSC Advances 4(6): 29112934. Google Scholar
Borode A, Ahmed N and Olubambi P (2019) Surfactant-aided dispersion of carbon nanomaterials in aqueous solution. Physics Fluids 31(7): 071301. CrossrefGoogle Scholar
Carriço A, Bogas J, Hawreen A and Guedes M (2018) Durability of multi-walled carbon nanotube reinforced concrete. Construction and Building Materials 164: 121133. CrossrefGoogle Scholar
Chen M, Wei Z, Zhu Y et al. (2008) Alignment and dispersion of functionalized carbon nanotubes in polymer composites induced by an electric field. Carbon 46(4): 706710. Google Scholar
Chen SJ, Zou B, Collins F et al. (2014) Predicting the influence of ultrasonication energy on the reinforcing efficiency of carbon nanotubes. Carbon 77: 110. CrossrefGoogle Scholar
Coleman JN, Khan U, Blau WJ and Gun'ko YK (2006) Small but strong: a review of the mechanical properties of carbon nanotube–polymer composites. Carbon 44(9): 16241652. CrossrefGoogle Scholar
Collins F, Lambert J and Wen H (2012) The influences of admixtures on the dispersion, workability, and strength of carbon nanotube–OPC paste mixtures. Cement and Concrete Composites 34(2): 201207. CrossrefGoogle Scholar
Demczyk B, Wang Y, Cumings J et al. (2002) Direct mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotubes. Materials Science and Engineering A 334(1–2): 173178. CrossrefGoogle Scholar
El-Gamal S, Hashem F and Amin M (2017) Influence of carbon nanotubes, nanosilica and nanometakaolin on some morphological-mechanical properties of oil well cement pastes subjected to elevated water curing temperature and regular room air curing temperature. Construction and Building Materials 146: 531546. CrossrefGoogle Scholar
Elkashef M and Abou-Zeid M (2017) Performance of carbon nanotubes in mortar using different surfactants. Canadian Journal of Civil Engineering 44(8): 619625. CrossrefGoogle Scholar
Fakhim B, Hassani A, Rashidi A and Ghodousi P (2015) Preparation and microstructural properties study on cement composites reinforced with multi-walled carbon nanotubes. Journal of Composite Materials 49(1): 8598. CrossrefGoogle Scholar
Fu L, Zhang X, Cheng J et al. (2003) Preparation of short carbon nanotubes by mechanical ball milling and their hydrogen adsorption behavior. Carbon 41(13): 25272532. Google Scholar
Hou J, Du W, Meng F, Zhao C and Du X (2018) Effective dispersion of multi-walled carbon nanotubes in aqueous solution using an ionic-Gemini dispersant. Journal of Colloid and Interface Science 512: 750757. CrossrefGoogle Scholar
Huang J, Liew J and Liew K (2021) Data-driven machine learning approach for exploring and assessing mechanical properties of carbon nanotube-reinforced cement composites. Composite Structures 267: 113917. CrossrefGoogle Scholar
Islam M, Rojas E, Bergey D, Johnson A and Yodh A (2003) High weight fraction surfactant solubilization of single-wall carbon nanotubes in water. Nano Letters 3(2): 269. CrossrefGoogle Scholar
Kim S, Tserengombo B, Choi S et al. (2018) Experimental investigation of dispersion characteristics and thermal conductivity of various surfactants on carbon based nanomaterial. International Communications in Heat and Mass Transfer 91: 95102. CrossrefGoogle Scholar
Konsta-Gdoutos M, Metaxa Z and Shah S (2010) Highly dispersed carbon nanotube reinforced cement based materials. Cement and Concerte Research 40(7): 10521059. CrossrefGoogle Scholar
Kumar S, Kolay P, Malla S and Mishra S (2012) Effect of multi-walled carbon nano tubes (CNT) on mechanical strength of cement paste. Journal of Materials in Civil Engineering 24(1): 84. CrossrefGoogle Scholar
Li J, Wei Z, Wang X, Hu J and Zhang Y (2012) Aggregation kinetics of SDBS-dispersed carbon nanotubes in different aqueous suspensions. Colloids and Surfaces A: Physicochemical and Engineering Aspects 409: 159166. Google Scholar
Li Q, Liu J and Xu S (2015) Progress in research on carbon nanotubes reinforced cementitious composites. Advanced Engineering Materials 2015: 116. CrossrefGoogle Scholar
Liu J, Ye Y, Xue Y, Xie X and Mai Y (2016) Recent advances in covalent functionalization of carbon nanomaterials with polymers: strategies and perspectives. Journal of Polymer Science A Polymer Chemistry 55(4): 622631. Google Scholar
Madni I, Hwang C, Park S, Choa Y and Kim H (2010) Mixed surfactant system for stable suspension of multiwalled carbon nanotubes. Colloids and Surfaces A: Physicochemical and Engineering Aspects 358(1–3): 101107. CrossrefGoogle Scholar
Makar J and Chan G (2010) Growth of cement hydration products on single walled carbon nanotubes. Journal of the American Ceramic Society 92(6): 13031310. Google Scholar
Mendoza O, Sierra G and Tobon J (2013) Influence of super plasticizer and Ca(OH)2 on the stability of functionalized multi-walled carbon nanotubes dispersions for cement composites applications. Construction and Building Materials 47: 771778. CrossrefGoogle Scholar
MoHURD (Ministry of Housing and Urban-Rural Development, PRC). (2010) GB/T 50082-2009: Standard for test methods of long-term performance and durability of ordinary concrete. China Standards Press, Beijing, China. Google Scholar
Moniruzzaman M and Winey K (2006) Polymer nanocomposites containing carbon nanotubes. Macromolecules 39(16): 51945205. CrossrefGoogle Scholar
Musso S, Tulliani J, Ferro G and Tagliaferro A (2009) Influence of carbon nanotubes structure on the mechanical behavior of cement composites. Composites Science and Technology 69(11–12): 19851990. CrossrefGoogle Scholar
Naqi A and Abbas N (2017) Experimental investigation on the contribution of pristine multi-walled carbon nanotubes (MWCNTs) addition to the strength enhancement of cement composites. IEEE International Conference on Engineering Technologies and Social Sciences, Bangkok, Thailand. IEEE, New York, NY, USA, pp. 13. https://doi.org/10.1109/ICETSS.2017.8324183. CrossrefGoogle Scholar
Nochaiya T and Chaipanich A (2011) Behavior of multi-walled carbon nanotubes on the porosity and microstructure of cement-based materials. Applied Surface Science 257(6): 19411945. CrossrefGoogle Scholar
Pane I and Hansen W (2005) Investigation of blended cement hydration by isothermal calorimetry and thermal analysis. Cement and Concrete Research 35(6): 11551164. CrossrefGoogle Scholar
Parveen S, Rana S, Fangueiro R and Paiva M (2015) Microstructure and mechanical properties of carbon nanotube reinforced cementitious composites developed using a novel dispersion technique. Cement and Concrete Research 73: 215227. CrossrefGoogle Scholar
Peigney A, Laurent C, Flahaut E, Bacsa R and Rousset A (2001) Specific surface area of carbon nanotubes and bundles of carbon nanotubes. Carbon 39: 507514. CrossrefGoogle Scholar
Pierard N, Fonseca A, Konya Z et al. (2001) Production of short carbon nanotubes with open tips by ball milling. Chemical Physics Letters 335(1–2): 18. CrossrefGoogle Scholar
Qin J, Qu J, Li Y et al. (2019) Mechanical properties of highly dispersed carbon nanotubes reinforced cement-based materials. IOP Conference Series: Materials Science and Engineering 569(2): 022025. CrossrefGoogle Scholar
Ramezani M, Kim YH and Sun ZH (2020) Probabilistic model for flexural strength of carbon nanotube reinforced cement-based materials. Composite Structures 253: 112748, https://doi.org/10.1016/j.compstruct.2020.112748. CrossrefGoogle Scholar
Rastogi R, Kaushal R, Tripathi S et al. (2008) Comparative study of carbon nanotube dispersion using surfactants. Journal of Colloid and Interface Science 328(2): 421428. CrossrefGoogle Scholar
Rausch J, Zhuang RC and Mäder E (2010) Surfactant assisted dispersion of functionalized multi-walled carbon nanotubes in aqueous media. Composites Part A: Applied Science and Manufacturing 41(9): 10381046. CrossrefGoogle Scholar
Rosen M and Kunjappu J (2012) Surfactants and Interfacial Phenomena. John Wiley & Sons, Hoboken, NJ, USA. CrossrefGoogle Scholar
Santanu P and Kartic CK (2004) A review on experimental studies of surfactant adsorption at the hydrophilic solid–water interface. Advances in Colloid and Interface Science 110(3): 7595. Google Scholar
SBQTS (State Bureau of Quality and Technical Supervision) (2004) GB/T 17671-1999: Method of testing cements – determination of strength. China Standards Press, Beijing, China. Google Scholar
SBQTS-SAC (State Bureau of Quality and Technical Supervision–China National Standardization Administration Committee) (2007) GB 175-2007: Common Portland cement. China Standards Press, Beijing, China. Google Scholar
Scrivener K, Füllmann T, Gallucci E, Walenta G and Bermejo E (2004) Quantitative study of portland cement hydration by X-ray diffraction/Rietveld analysis and independent methods. Cement and Concrete Research 34(9): 15411547. CrossrefGoogle Scholar
Shao H, Chen B, Li B, Tang S and Li Z (2017) Influence of dispersants on the properties of CNTs reinforced cement-based materials. Construction and Building Materials 131: 186194. CrossrefGoogle Scholar
Shi T, Li Z, Guo J, Gong H and Gu C (2019) Research progress on CNTs/CNFs-modified cement-based composites – a review. Construction and Building Materials 202: 290307. CrossrefGoogle Scholar
Sohrabi B, Poorgholami-Bejarpasi N and Nayeri N (2014) Dispersion of carbon nanotubes using mixed surfactants: experimental and molecular dynamics simulation studies. Journal of Physical Chemistry B 118(11): 30943103. CrossrefGoogle Scholar
Song C, Hong G and Choi S (2020) Effect of dispersibility of carbon nanotubes by silica fume on material properties of cement mortars: hydration, pore structure, mechanical properties, self-desiccation, and autogenous shrinkage. Construction and Building Materials 265: 120318, https://doi.org/10.1016/j.conbuildmat.2020.120318. CrossrefGoogle Scholar
Sumitomo S, Koizumi H, Uddin M et al. (2018) Comparison of dispersion behavior of agglomerated particles in liquid between ultrasonic irradiation and mechanical stirring. Ultrasonics Sonochemistry 40(Pt A): 822831. CrossrefGoogle Scholar
Tafesse M and Kim H (2019) The role of carbon nanotube on hydration kinetics and shrinkage of cement composite. Composites Part B Engineering 169: 5564. CrossrefGoogle Scholar
Wang B and Zhao R (2017) Effect of graphene nano-sheets on the chloride penetration and microstructure of the cement based composite. Construction and Building Materials 161: 715722. CrossrefGoogle Scholar
Wang B, Han Y and Song K (2012) Research progress of the dispersion of carbon nanotubes. Materials Review 26(4A): 2325, 30 (in Chinese). Google Scholar
Wang B, Zhang Y and Liu S (2013) Influence of carbon nanofibers on the mechanical performance and microstructure of cement-based materials. Nanoscience and Nanotechnology Letters 5(10): 1121118. Google Scholar
Xie X, Mai Y and Zhou X. (2005) Dispersion and alignment of carbon nanotubes in polymer matrix: a review. Materials Science and Engineering: R: Reports 49(4): 89112. CrossrefGoogle Scholar
Xu P, Shi L, Huang J et al. (2018) Methods of dispersion and stabilization of several nanomaterials in water. Ferroelectrics 527(1): 133148. CrossrefGoogle Scholar
Yu H, Luo D, Li P, Li Q and Sun G (2014) Fracture toughness enhancement of cement paste with multi-walled carbon nanotubes. Construction and Building Materials 70(15): 332338. Google Scholar
Zhao J, Ren S, Du Y et al. (2013) Study on the influence of carbon nanotubes on the mechanical properties of Portland cement. Bulletin of the Chinese Ceramic Society 32(07): 13611366. Google Scholar
Zhou Y, Fang Y and Ramasamy R (2019) Non-covalent functionalization of carbon nanotubes for electrochemical biosensor development. Sensors 19(2): 392. CrossrefGoogle Scholar

Related content

Related search

By Keyword
By Author

No search history

Recently Viewed